Granulation screw

Specification: Φ35-Φ250mm
Length-diameter ratio: L/D=10~35
Capacity category: conventional type, low-speed high-yield type, high-speed high-yield type
Screw structure: ordinary screw, exhaust screw
Applicable materials: PE, PP, ABS, PC, PET, PA and filler

Our Advantages:

1. The screw is designed for the characteristics of the material, the output is high and the plasticizing is good, the material is good in luster, and the product value is higher when the particles are full
2. The pressure is stable within 1Mpa
3. There is no riser at the exhaust port
4. Combined with the raw material, the use of various wear-resistant, corrosion-resistant steel properties, with advanced processing technology for manufacturing, screw life increased by more than 30%

We have the following expertise:

1. New material granulation, you can be a new powder plastic, through the screw extrusion to create particles
2. Mixed, modified material granulation, that is, several plastics are mixed together and then extruded through a screw to create a new particle
3. Cleaning and recycling materials granulation, that is, plastic products that have been done, such as: film, pipe, plate, etc., but these products have been damaged, can not be used, or in the process of production, defective products, etc., we put these products through crushing, cleaning, sorting caused particles.

The company undertakes Φ35-Φ250 length-diameter ratio 1:10-1:35 screw barrel business

1) Single piece processing
2) Supporting production
3) Upgrade the existing equipment

• 
•